Kobra 2 Bed Mesh Adjustment

07 August 2025 Update

Updated page so the input will also take json format mesh in other Klipper output(e.g. Kobra S1).

17 April 2025

This page is intended to help manually adjust the bed mesh from Anycubic's KobraOS of Kobra 2 Max. You can find more details regarding this here Tramming the bed of Kobra 2 Max.

Please note: This is only for experienced users, modifying printer.cfg will void your warranty. This page does not upload anything you pasted. All mesh value data are locally processed in your browser.

Disclaimer

We are sharing our experience solely for informational purposes. We do not encourage users to disassemble the printer or adjust configuration files that are not meant to be accessible by default. We do not accept responsibility or liability for any damage caused to the printer as a result of following modifications.

Paste the line in printer.cfg starts with 'points : ' or '"points": ' then click the "Load" button:

Load

Settings of adjustment

Step: 0.01mm 0.02mm 0.03mm 0.04mm 0.05mm 0.06mm 0.07mm 0.08mm

2 decimal places: Yes No , we feel no point to keep values after 2 decimal places, but it is up to you.

Adjustment

Lower values bring nozzle closer to the bed. Becareful with postive and negative signs.

The "points : " line after adjustment

Copy and paste into printer.cfg to replace original line.

*The bed photo is stolen from https://www.printables.com/model/671915. All credits goes to the author.