Specifications
Build Volume : 500 x 500 x 500mm (WDH), 500 x 500 x 450mm (WDH) with enclosure kit installed
Build Platform : PEI coated spring steel
Auto Leveling : Inductive sensor(Eddy current scanning)
Extruder : Planetary gear direct-drive extruder
Printing Speed : Max 700mm/s
Acceleration : Max 40000mm/s2
Flow Rate : Max 50mm3/s
Filament Diameter : 1.75mm
Filament Compatibility : PLA, PETG, TPU, PETG-CF, ABS, ASA, PA, PC
Filament Run-Out Sensor : Yes
Default Nozzle Size : 0.4mm
Max Nozzel Temperature : ≤300°C
Max Bed Temperature : ≤100°C
Layer Resolution : 0.1 - 0.3mm with 0.4mm nozzle
X-Axis : Linear Rails
Y-Axis : Linear Rails
Z-Axis : Linear Rails
Connectivity : Ethernet, Wi-Fi: 2.4GHz/5GHz
Printer Size : 700 x 710 x 750mm (WDH)
Printer Weight : ≈28kg
All Sovol 3D Printers come with 12 months warranty for the main body, 3 months for extruder unit, 1 months for accessories, provided by Sovol official support team.
Please visit https://www.sovol3d.com/pages/help-center for detailed printer installation/parts replacement/troubleshooting instructions, also firmware and software updates.
For technical support and warranty, please email [email protected] to submit a ticket. Please make sure to attached our GST invoice for prove of purchase.
Sovol's printers are pre-assembled Voron clones that requires good DIY skills and in-depth 3D printer knowledge. Due to there is no lock-down for flashing custom firmware and changes to critical configuration parameters, please make sure you know what you are doing before making any changes to the stock firmware/config/settings. Please check the Sovol's official forum https://forum.sovol3d.com if you need any help.
