Please note we are selling the newer version of the Zero that moved the filament mount and filament break sensor to the right hand side panel, no longer at the back of the printer as photo.
Specifications
Build Volume : 152.4 x 152.4 x 152.5mm (WDH)
Build Platform : PEI coated spring steel
Auto Leveling : Inductive sensor(Eddy current scanning) + Force sensor
Extruder : Planetary gear direct-drive extruder
Printing Speed : Max 1200mm/s
Acceleration : Max 40000mm/s2
Flow Rate : Max 50mm3/s
Filament Diameter : 1.75mm
Filament Compatibility : PLA, PETG, TPU, PETG-CF, ABS, ASA, PA, PC
Filament Run-Out Sensor : Yes
Default Nozzle Size : 0.4mm
Max Nozzel Temperature : ≤350°C
Max Bed Temperature : ≤120°C
Layer Resolution : 0.1 - 0.3mm with 0.4mm nozzle
X-Axis : Linear Rails
Y-Axis : Linear Rails
Z-Axis : Linear Rails
Connectivity : Ethernet, Wi-Fi: 2.4GHz (WPA2 only)
Printer Size : 345 x 420 x 475mm (WDH)
Printer Weight : ≈14kg
All Sovol 3D Printers come with 12 months warranty for the main body, 3 months for extruder unit, 1 months for accessories, provided by Sovol official support team.
Please visit https://www.sovol3d.com/pages/help-center for detailed printer installation/parts replacement/troubleshooting instructions, also firmware and software updates.
For technical support and warranty, please email [email protected] to submit a ticket. Please make sure to attached our GST invoice for prove of purchase.
Sovol's printers are pre-assembled Voron clones that requires good DIY skills and in-depth 3D printer knowledge. Due to there is no lock-down for flashing custom firmware and changes to critical configuration parameters, please make sure you know what you are doing before making any changes to the stock firmware/config/settings. Please check the Sovol's official forum https://forum.sovol3d.com if you need any help.
